 |
| After glue-up, including the bottom frame (ash) |
 |
| Nobody seems to like this part (me neither) - cutting a hole in the boat just doesn't seem right. |
 |
| screwholes for 5 mm x 60 mm bronze screws that where screwed in from the bottom |
 |
| CB installed. Builder is very happy about this step. Actually I was slightly frightened if everything would work out fine, but it was much easier than I thought. For me placing the screws to pull the gluing seam tight worked best, I did not use any clamps. |
Keine Kommentare:
Kommentar veröffentlichen