Samstag, 12. Juli 2014

Skeg and Centerboard-case

Making the skeg was next - as for the bottom, I went for ash.

Quarter-sawn pieces of ash glued together

Glued to the hull with epoxy with microballoons
And I also made the sides of the centerboard-case (box?). 12 mm Okume marine plywood with a layer of WRC leftover strips - better than throwing them away and a nice finish as I find. Already covered in 2 layers of epoxy without glass on the outside. Inside has been glassed with 3 layers of epoxy.

Recycling the leftovers from planking...

Keine Kommentare:

Kommentar veröffentlichen